Pfaff 3Mm Rolled Hem Foot For Idt System 820249096
SKU: NA0599
£28.00
Product Overview
Product Overview
Hemming prevents the edges from fraying and results in a clean, durable edge. With the Rolled Hem Foot, you can hem light to medium weight fabrics for clothing and home decorating items without having to pre-iron the fabric edges.
- Select a straight stitch, snap on the Rolled Hem Foot and engage IDT system (if available on your machine).
- If needed, press only the beginning of the hem to 2, 3 or 4 mm wide, depending on the size of your foot.
- Place it flat in the groove under the foot and sew, pulling the cut edge of the fabric into the scroll of the hemmer.
- Lower the foot and continue sewing while holding for a few stitches.
- Lower the needle into the fabric to hold it in place.
- Then raise the presser foot keeping the cut edge up in front of the foot.
- Do not allow fabric to run under the right half of the presser foot.
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
