Husqvarna Marking Foot 411850345 Fits Machine Categories 1-7
SKU: NA0720
£19.60
Was £28.00
Saving £8.40
Product Overview
Product Overview
Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly.
- Tailor Tacks: Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove
- Open/ladder seams:
- Stitch two pieces of fabric right sides together
- Pull the fabrics to expose the open seam created by the looping threads.
- Press seam allowances away from the open work and stitch down if desired.
- Decorative Loops or Fringe:
- Stitch with Marking Foot following desired design.
- Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them. (For fringe, cut at center of loops.)
Fits Husqvarna Categories 1,2,3,4,5,6,7
Please see the third image for Husqvarna machine categories
Clearance Faded packing
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
