Husqvarna 1/4 Inch (6Mm) Bias Binder 412989545
SKU: NA0834
£25.90
Was £37.00
Saving £11.10
Product Overview
Product Overview
To bind edges with 1/4 Inch (6 mm) Bias Binding, cut a 1 Inch (24 mm) wide bias strip of light weight fabric, or use packaged narrow double fold Bias Binding. Straight stitch, length 2.5, or zigzag or decorative stitch at desired length.
- Snap on Bias Binder.
- Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel
- guide, into the slot and pull it down under the foot.
- Place the edge to be bound into the groove on the left side of the funnel guide.
- Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen
- the screw on the top of the foot and position the funnel guide as needed.
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
