Bernina Tailor-Tack Foot #7V 0084527400
SKU: NA0274
£57.50
Product Overview
Product Overview
As well as for marking seam lines, Tailor Tack Foot #7V can be used for sewing elegant embellishments, imitation hemstitch (fagotting), fringe, and 3D effects.
When sewing together two pieces of fabric with Tailor Tack Foot #7V the thread tension is loosened slightly, so that the thread can pass easily over the ridge in the centre of the foot. The zigzag stitch used forms loose loops which then slide off to the back thanks to the special V-shaped opening on the foot.
For marking seam lines or darts, the fabric is carefully pulled apart after sewing. The Tailor Tack Foot #7V can also be used for decorative purposes.
- For sewing elegant embellishments and imitation hemstitch
- For fringes and 3D effects
- The hemstitch specialist
- Suitable for 9mm machines.
Further Information
https://www.bernina.com/BERNINA/media/Support/Accessories/Presser_Feet/%237/EN/035628-50-07_-07.pdf
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
