Bernette Piping Foot 5020405115
SKU: NA0916
£34.56
Product Overview
Product Overview
The piping foot is qualified for creating or sewing in braids, or even both actions in one step. That gives main points to home furnishing or garments.
Instructions
- Set the machine for a 4-thread overlock or a wide 3-thread overlock (left needle)
- Cords/Piping including fabric of up to 1/8 Inch (3 mm) diameter can used.
- Raise the presser foot and snap on Piping foot
- Place bias fabric strip around cord, fabric edges to the right, place under the foot, cord into the groove
- Lower the foot, sewa few stitches to fix it
- Raise the presser foot.
- Place the two layers of fabric, right sides towards the piping.
- Lower the presser foot and sew
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
