Bernette Cording Foot 5020405117
SKU: NA0918
£27.00
Product Overview
Product Overview
This presser foot guides decorative and fine cords of up to 2 mm thickness exactly and precisely below the coverstitch seam as they are being sewn on. Alternatively, it can also be used to create and insert piping.
Instructions
- To sew Piping
- 1. Set machine for Chain Stitch, using needle D.
- 2. Raise the presser foot and change to Cording foot.
- 3. Note: Cording guide is not used for this function.
- 4. Note: cord diameter of up to 1/16 Inch (2.0 mm) can be used
- 5. Insert cord through the groove of the Cording foot.
- 6. Wrap fabric around cord in front of foot. Slide fabric under foot.
- 7. Lower the presser foot and sew over fabric.
- 8. Note: Hold cord behind the foot when beginning to sew.
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
