Bernette Belt-Loop Foot 5020405110
SKU: NA0912
£34.56
Product Overview
Product Overview
The belt-loop foot is used to fold bias or straight binding, which it then quickly and easily turns into straps or belt loops with the cover- or chainstitch.
Instructions
- Set machine for Coverstich, using needles C & E.
- Note: 1-1 1/4 Inch (25-28mm) width tape can be used
- Raise the presser foot and snap on Belt-loop foot.
- For easier insertion into the belt-loop foot, trim fabric corners.
- Insert the tape into the guide by using the tweezers to feed through slot on front of the foot.
- Extend tail of bias tape 2 Inch (50mm) behind foot.
- Lower presser foot and sew, belt loops are created without fabric underneath.
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Get Inspired
From our experts to you
