Bernina Piping Foot #38V 0310217200
Product Overview
Product Overview
Piping Foot #38 is often also termed the “uneven foot, owing to the different thicknesses of the two halves of its sole. Consequently, this foot is ideal for creating narrow-to-medium piping, as well as for sewing unevenly thick fabric layers...The right side of Piping Foot #38 is higher than the left side, allowing it to ride easily over the fabric layers as you sew. In addition to piping, this foot is also suitable for sewing on thick tape and ribbon, cords, or hook-and-loop tape...TIP: when sewing on tape, the tape should lie under the right side of the foot flush with the edge of the thicker left side. This will allow the needle to catch the edge of the tape more easily.
- For narrow to medium-width piping
- For sewing on thick and thin ribbons and hook-and-loop tape
- For 5.5 mm and 9 mm machines
Further Information
https://www.bernina.com/BERNINA/media/Support/Accessories/Presser_Feet/%2338/EN/035628-50-38_-38.pdf
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
You may also like
Get Inspired
From our experts to you
