Pfaff Zipper Foot For Idt System 820248096

SKU: NA0598

£28.00

Quantity

Length

🚚 Order within the next 2 hours, 15 minutes for delivery by 22 May, 2024.

Product Overview

The Zipper Foot is the most important zipper tool and will help you stitch the zipper perfectly in place. When attaching any zipper, it is important to sew right next to the edge of the zipper teeth. You can do that with the special Zipper Foot. It can be snapped onto the left or right of the sewing foot ankle, as needed.

Remove the presser foot. Attach the Bias Binde
Cut the beginning of the bias tape at a diagonal.
Feed the tape into the scroll of the binder and pull out to the back
Adjust the binder and/or the needle position so that the needle pierces the fabric approximately 1 - 1.5 mm (1/16 Inch) from the folded edge of the bias tape
Stitch about 25 mm (1 Inch) along the Bias Tape
Insert the edge of the fabric to be bound between the Bias Tape edges into the slot of the binder. The Bias Tape will enclose the raw edge automatically during sewing

Cut Type: Fat Quarter

Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered. We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).